Archive for the Category: Solutions

The South Native indonesia Clay Crusher

This simple manual crusher was witnessed by Benconq in a small porcelain tile works in Tamil Nadu. It can be used to crush into 3 to 4 mm any stones occurring in the clay, though this will depend on how exhausted the machine is. The 2 so far found are very old and have stood [...]

Leave a comment

pendulum clay crusher brick crusher

Description Your Pendulum Clay Crusher is designed to meet the needs of small scale product or service manufacturers, such as packet makers. The machine crushes, grinds and displays dry lumps regarding clay (or shale, laterite and friable rock), producing a good powder, which can after that be easily turned into an easy malleable clay from [...]

Leave a comment

How to select the crusher to crush the different minerals

HOW TO CHOOSE CRUSHER BY DIFFERENT ORE Because of the different of compressive strength and abrasion resistance, humidity, so we should select the crushing machine According to the inherent characteristics of the ore. If the stone are very hard, or Delicate, resilient like Quartzite, basalt, granitic rocks, quartz porphyry, sandstone, limestone, iron ore, quartz veins, [...]

Leave a comment

Chrome Smelting Equipment Supplier

Chrome Smelting Technology Most of the world’s production of chromite (95%) is used in the metallurgical industry in the form of ferrochromium alloys. The alloys are produced by high temperature reduction smelting of chromite. They are essentially alloys of iron and chromium with much lesser amounts of carbon and silicon, the amounts depending upon the [...]

Leave a comment

Robo Sand Making Machine and Washing Plant

The present paper focuses on investigating characteristics of M30 concrete with partial replacement of cement with Ground Granulated Blastfurnace Slag and sand with the ROBO sand (crusher dust). The cubes and cylinders are tested for both compressive and tensile strengths. It is found that by the partial replacement of cement with GGBS and sand with [...]

Leave a comment